Applications: Electric machines and installations with periodical connection cycles.
Heating, cold, lighting, etc.
|
References:
CR24.C08 8-hour cycle programmer
CR24.C24 24-hour cycle programmer |
|
| Features |
1 cycle per 8 hours
1 cycle per 24 hours
Contact capabilities: 10A - 250Vac
Red tits go, blue tits, stop
Connection: Cables
|
|
|
|
Reference:
DCR24 Daily programmer clock |
|
| Features |
Contact capabilities:
16A - 250Vac - T 85º
50/60 Hz
Triggering: 1,7 W syncronous engine
Connection: 6,3 x 0,8 mm
Mount drill: 65 x 65 mm
Front-end with lid: 75 x 75 mm. 30 mm back
• Minimum time between steps: 15 minutes.
• Programmation through 96 cursors
(4 per hour).
• Locked cursor points in RED colour the
duration of programmed connection.
|
|
|
|
Reference:
DCR25 Weekly programmer clock (digital) |
|
| Features |
Contact capabilities: 10A - 250Vac
Connection: 6,3 x 0,8 mm
• Daily and weekly program in the same device.
• Groups programs in weekday blocks
(up to 9 on and 9 off per day).
• Minimum maneuver 1 minute.
• Go reserve.
• Litium battery for mains supply drop.
Duration 10 years.
|
|
|
|
Reference:
DPD DIN rail adapter for
DCR24 y DCR25 |
|
| Accesorio |
DPT
65x65 a 69x69 mm drill adapter
|
|
|
